Kaser Login Request a Quote Call Us Now!

3130 S 7th Street
Lincoln, NE 68502

MTWThF: 7:00AM-4:00PM
Sat/Sun: Closed

Powder Coating: Past Parts

Post Cure Vs. Pre-Cure Silver Vein Powder

Powder Coating Process

Powder Coating Oven

10' Wide by 25' Long by 10' Tall

Powder Coating Booth

Powder Coating

Our powder coating booth and oven are sized to fit a variety of jobs with a work area of 10 feet wide by 25 feet long by 10 feet tall.  From automobile frames to business card holders, we have the capabilities to do it all.

What is Powder Coating?

Powder coating is used to efficiently and effectively coat products with a harder, more durable finish than traditional liquid coatings. The powder coating process starts with paint in a dry powder that is applied to the substrate using an electrostatic charge. Once applied, the powder is cured at high temperatures (approximately 400° F), which causes the powder particles to liquefy and bond together. The powder coating process is mainly used on electrically conductive materials such as steel, aluminum, and cast-iron.

Surface Preparation

The key to a long lasting, durable coating is surface preparation. Our in house blasting and washing facilities ensure high quality surface preparation. Every part that comes into the Kaser powder coating facility is pretreated using a three-stage pressure washing process. First, a degreasing chemical is used to remove grease and oils from the part. Next, the part is rinsed with fresh water. Finally an iron phosphate treatment is applied. The phosphate etches the part which allows for better powder adhesion, and creates an extra barrier to fight against metal corrosion.

Powder Coating Photo Gallery:

Powder Coating Gallery!

Copyright © 2019 Kaser Blasting and Coatings
Privacy Policy

Kaser Blasting & Coatings, Sandblasting, Lincoln, NE